Double Sided Paper Tape – Golf Grip
Price Range
From: $3.76 (Inc GST)
Colour: Cream
Roll Size: Standard length 33 metres by required width 6mm to 1220mm
Adhesive: Rubber Natural
Description: Paper with rubber based adhesive on both sides with a white creped silicon release liner.
Related Products
Double Sided Paper Tape by Tenacious Tapes. Adhesive tape comparable to 3M Double Coated Crepe Paper Tape 400, Tesa 4903 or Stylus 941. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Cream
Roll Size: Standard length 33 metres by required width 6mm to 1220mm
Adhesive: Rubber Natural
Description: Paper with rubber based adhesive on both sides with a white creped silicon release liner.
Application:
1. Main use – for adhering Golf Grips
2. General Purpose
3. Point of Sale
Technical Details:
| Tape Thickness: | 0.19mm |
| Liner Thickness: | 0.14mm |
| Breaking Load: | 32 N/cm |
| Adhesion to Steel: | Open Side 2.2 N/cm Closed Side 2.2 N/cm |
| Service Temperature: | 0ºC to +60ºC |
| Storage Temperature: | 15ºC to 25ºC |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
Specification: Double Sided Paper Tape – Golf Grip
|
||||||
| Dimensions | ||||||
|---|---|---|---|---|---|---|
|
||||||
From: $3.76 (Inc GST)